12-Volt Dc System; Battery(S); Battery Switch Positions - Bayliner Classic Runabouts Owner's Manual

Classic runabouts series boat
Hide thumbs Also See for Classic Runabouts:
Table of Contents

Advertisement

Classic Runabouts • Owner's Manual Supplement

12-Volt DC System

Battery(s)

• The battery(s) supplies electricity for lights, 12-volt accessories and engine starting.
• The Electrical section of Chapter 8 in the Sport Boat Owner's Manual provides battery care and
maintenance instructions.
Battery Switch (If Equipped with Two Batteries)
SHOCK and ELECTRICAL SYSTEM DAMAGE HAZARD!
When the engine is running, NEVER turn Off the battery switch or disconnect the bat-
tery cables. Doing either could cause damage to your boat's engine and/or electrical
system components.
• Standby-loads, such as the automatic bilge pumps
and the stereo memory, are not affected by the battery
switch since they are wired directly to the batteries
(see the Wiring Diagrams section of this chapter for
more details).
• Turn the battery switch to the Off position whenever
your boat will be unoccupied for long periods of time.

Battery Switch Positions

Since your boat's batteries were installed by your dealer, the battery switch positions listed
below may vary. Make sure your selling dealer fully explains how to use the battery switches.
BATTERY SWITCH
POSITIONS
POSITION
1
POSITION
2
BOTH
POSITION
!
CAUTION
NOTICE
ENGINE
ACCESSORIES & LIGHTS
STARTING
Battery 1
provides
starting power
Battery 2
provides
starting power
BOTH batteries
BOTH batteries provide power for
Provide
accessories and lights (not advised
starting power
unless engine is running)
BATTERY
SWITCH
Battery 1
provides power for
accessories and lights
Battery 2
provides power for
accessories and lights
Chapter 11: Electrical System
ENGINE
ALTERNATOR
Charges
battery 1
Charges
battery 2
Charges
BOTH batteries
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents