Adjustment Of Movement Detection Sensitivity (This Is A Dealer Operation); Alarm Cycle - Cobra SPYBALL 6829 User Instructions

7. ADJUSTMENT OF MOVEMENT DETECTION SENSITIVITY (this is a dealer
operation)
The movement detector can be adjusted to 8 different levels of sensitivity to displacement
and 8 different levels of sensitivity to shock.
performance by the dealer upon installation. Please consult your dealer if you require a
different setting.

8. ALARM CYCLE

Any irregularity that is detected by:
- the peripheral protection circuit (e.g. the opening of a protected storage compartment or
case)
the movement sensor (e.g. an attempt to drag the motorcycle away)
-
- the ignition lock tamper protection circuit (e.g. an attempt to force the lock)
generates a 30-sec. alarm cycle.
The alarm condition is signalled by the 114dB piezoelectric siren that is integrated within the
device (sound warning) as well as by the flashing of the turn indicators (visual warning).
After that the device automatically returns to the set condition.
During the alarm condition pressing the remote control button n. 1 once will simply silence the
siren and stop the indicators, leaving the system armed and ready to detect further
irregularities. To disarm the system, press the push-button twice.
For environmental protection, the alarm cycles in an activation period are limited to a
maximum of 10/sensor trigger input.
12
The detector is fine-tuned for optimal