Cobra SPYBALL 6829 User Instructions page 17

- Anti-hijack function (see paragraph 10)
Polarity of instantaneous alarm trigger input (this selection should be set up by the
-
installer and must not be altered by the user once the security system has been fitted).
Procedure:
While the security system is disarmed, turn ignition on, press and hold down push-button n. 1
of the transmitter about 7 seconds, until the LED lights up, then release.  The LED remains
on about 3 seconds.  During this lapse of time, press push-button n. 1 again.  A short
sharp audible signal confirms that the procedure has been initiated. The LED switches off, and
then provides five different visual indications that relate to the five selectable functions. Please
refer to the chart below:
VISUAL SELECTABLE
INDICATION FUNCTION
1 flash Biker Recognition
2 flashes Arming
audible signals
17
TO SELECT
CONFIRMATION
SIGNAL
Press push-button n. 1 of
the transmitter
first flash
Three (3)
signals follow
and disarming Press push-button n. 1 of
the transmitter
second flash
Three (3)
signals follow
TO DESELECT
CONFIRMATION
SIGNAL
Press push-button n. 2 of
after the the transmitter after the
first flash
sharp audible One (1) sharp audible
signal follows
Press push-button n. 2 of
after the the transmitter after the
second flash
sharp audible One (1) sharp audible
signal follows