Cobra SPYBALL 6829 User Instructions page 28

PIN: ........................................................................
EMERGENCY DISARMING VIA PIN CODE
If the full system is armed:
Turn ignition on.  The alarm starts to sound.
1.
Wait.  The alarm stops. The LED switches off, then it starts to flash slowly.
2.
3. Count the number of flashes. As soon as the number of flashes equals the first digit of your PIN code,
turn ignition off (for example, if the first number of your code is 3, then wait for the LED to flash 3 times
before turning the ignition OFF).  The LED switches off.
4. Within 3 seconds, turn ignition on again. Count the number of flashes. As soon as the number of
flashes equals the second digit of your PIN code, turn ignition off (e.g., if the second digit of your code
is 10, then wait for the LED to flash ten times before turning the ignition OFF).  The LED switches off.
Enter the remaining digits of the PIN code using the same procedure.  In the event of a error, an
5.
alarm cycle will follow. At the end of the alarm cycle you can restart the procedure.
ONCE ALL THE DIGITS HAVE BEEN ENTERED CORRECTLY, THE SYSTEM DISARMS WITH A LONG
BLEEP, THEN IT SWITCHES TO SERVICE MODE (see paragraph 12).
If only the immobiliser is armed (Spyball 6829):
Turn ignition on.  The LED flashes quickly for 12 secs.
1.
Wait.  The LED switches off, then it starts to flash slowly.
2.
Enter the digits of the PIN code using the same procedure as described above.  In the event of a
3.
error entering the first two digits, the LED will start to flash quickly. Turn ignition on and repeat the
procedure.
ONCE ALL THE DIGITS HAVE BEEN ENTERED CORRECTLY, THE SYSTEM DISARMS WITH A LONG
BLEEP, THEN IT SWITCHES TO SERVICE MODE (see paragraph 12).
06DE3248A – 03/10
28

Cobra Automotive Technologies
Via Astico 41 – 21100 VARESE – ITALY
www.cobra-at.com