Update Procedure - Integra DTR-5.9 Service Manual

QQ
3 7 63 1515 0
FIRMWARE UPDATE-2
UPDATE OF MAIN MICROPROCESSOR-2/2

Update Procedure

1. Double click "Update.exe Update.exe" in the unzipped folder "Update_SR606Main1.2.zip" (Folder name depends on the version).
The following window will appear.
Updater
COM Port(C)
Firmware Read Result
001. F0000007 / FF000000
002. F0000007 / 01000000
003. F0000007 / 02000000
2. Click "Main Update Main Update" button. The update takes about 15 minutes.
The message on Front Display will change as follows
TE
L 13942296513
S e a r c h F /W ...
F W U p d a te 0 1 0 0 0
O K : S u m = F 1 4 B 3 F 1 E
3. After the update ends, unplug the power code, remove the jig from the unit, and plug it again.
www
4. Turn on the unit and initialize it by holding down VCR/DVR
Confirm the new version number. Refer to "FIRMWARE UPDATE-1"
.
http://www.xiaoyu163.com
Main Update
DSP Update
Main Update
DSP Update
Front Display
Check sum
Update complete
VCR/DVR and the pressing On/Standby
x ao
y
i
http://www.xiaoyu163.com
8
Log Visible
Q Q
This information will appear when
3 6 7 1 3
the click of Main Update is accepted.
Updater
COM Port(C)
Firmware Read Result
001. F0000007 / FF000000
002. F0000007 / 01000000
003. F0000007 / 02000000
Updata Request Receive (F0000007)
Firmware List Send
Firmware List Send
Firmware List Send (01000000)
Main Update
DSP Update
(Number depends on the version)
On/Standby.
u163
.
2 9 9 4 2 8
X
If it is ticked, Log appears
1 5 0 5 8 2 9 9 4
while writing is proceeding.
Log Visible
m
co
DTR-5.9
9 9
2 8 9 9
X