Details of the tension control
4.6.6
Tension control monitor output (Pr. 52)
The internally converted values during tension control can be output as monitored items to the PU/DU display.
Set a value corresponding to the desired monitored item in Pr. 52.
The selected monitored item is displayed on PU/DU instead of the voltage monitor.
When the tension control is disabled, 0% is displayed.
Minimum
Signal Name
Increment
Tension
0.1%
command
Mechanical
loss
0.1%
compensation
Inertia
0.1%
compensation
The value displayed on the monitor is a signal value plus 500%.
Signal Value
Monitor Display
-400% to -0.1%
100 to 499.9%
0%
500.0%
0.1% to 400%
500.1 to 900%
66
Modbus-RTU
Pr.52 Setting
Register
63
40263
64
40264
65
40265
Mitsubishi Inverter
Protocol
Monitoring
Number
3F
40
41