Kyocera TASKalfa 300i Service Manual page 59

Maintenance
item No.
Caution
U034
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Adjustment: Center line adjustment
1. Select the item to be adjusted.
Display
LSUOUT LEFT
(MPT)
LSUOUT LEFT
(CAS 1)
LSUOUT LEFT
(CAS 2)
LSUOUT LEFT
(CAS 3)
LSUOUT LEFT
(CAS 4)
LSUOUT LEFT
(DUP)
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Remark
If the setting value for feeding from the MP tray is changed, the difference from the former value is added to or
subtracted from the values of other items.
U066 U071
(P.1-3-30) (P.1-3-34)
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from cassette 2
Paper feed from optional cassette 3
Paper feed from optional cassette 4
Duplex mode (second)
Center line of printing
(within ± 0.5 mm)
Correct image
Description
Setting
range
-10.0 to
10.0
-10.0 to
10.0
-10.0 to
10.0
-10.0 to
10.0
-10.0 to
10.0
-10.0 to
10.0
Output
example 1
Figure 1-3-5
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
Output
example 2
2K5
1-3-23