Dip Switch - Hamamatsu Photonics C11440-10C Instruction Manual

③ Timing I/O connector [TIMING I/O]
The connector is used to output various signals.
Note
•
④ Camera connector [DIGITAL OUT]
This is used to connect the camera to the computer.

⑤ DIP switch

•
⑥ DC power input connector
This is the power supply terminal. Use the accessory AC adaptor.
⑦ Camera attachment stand
This is used to secure the camera in place when using a tripod.
• Be careful not to allow the fitting screw to enter more than 8 mm from
Note
the surface of the mount. Screwing this in excessively may impair
normal operation.
Please see 12-2 [TIMING OUTPUT SETTING] for details.
Do not change the setup of the switch.
C11440-10C Ver.1.2
11