Routing The Cable; Fitting A Lightning Protection Unit; Figure 28 - Disconnecting The Odu - Motorola PTP 300 Series User Manual

Point-to-point wireless bridge
Hide thumbs Also See for PTP 300 Series:
Table of Contents

Advertisement

CAUTION
To prevent damage to the ODU while making or breaking the connection, ensure that
power is removed from the system at the PIDU Plus.

6.5.4 Routing the Cable

After connecting the cable to the ODU it can be routed and secured using standard cable
routing and securing techniques. When the cable is in place it can then be cut to the desired
length at the PIDU Plus prior to connection to the PIDU Plus.

6.5.5 Fitting a Lightning Protection Unit

If you have opted to fit a Lightning Protection unit, this should be installed by following the
manufacturer's instruction. For recommended types see Section 5 "Lightning Protection".
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 28 - Disconnecting the ODU

58
6 Installation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 500 series

Table of Contents