Maintenance; Recharging The Battery - infaco electro'flor User Manual

Portable electronic flower thinning machine
Table of Contents

Advertisement

During the off-season, recharge your battery at least once every two months and
store your machine in a dry place at a temperature of between 10° C and 25° C
maximum.
We strongly recommend that you carry out our suggested servicing routine every year.
This will allow you to start off the following season comfortably and in complete safety.
For safety reasons, and to ensure that your battery belt works properly, it is very
important that you do not recharge it inside its carry-case. It should be recharged
in the open air to avoid the possibility of overheating (see picture).
Waistcoat hung
up by the eyelet
Battery socket no. 17
Connect battery socket No. 17 to charger socket No. 23.
The charger function starts up automatically a few seconds after connection. Indicator
light No. 24 lights up and flashes every 30 seconds throughout the charging period. If
the charger indicator light does not light up, leave your battery connected and
disconnect and re-connect the charger mains socket (230 V) until the light comes on.
When your battery is fully charged, the indicator light flashes rapidly (every 5 seconds).
From then on, the charger only provides a maintenance charge.
Do not leave your battery on charge for more than 15 hours.
When the battery is charged, disconnect the charger to avoid damage caused by a
possible power surge in your electricity supply.
Using a charger or battery other than those made by us is strictly prohibited as there is a
risk of breakdown or accident; such use will cancel the manufacturer's guarantee.
It is essential to recharge the battery at least every 2 months during the off-season.

MAINTENANCE

RECHARGING THE BATTERY

Charger LED no.
Charger socket no. 23
24
Charger no. 22
placed on a
stable surface

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electro'flor ec2008

Table of Contents