Using The On-Screen Menus; Showing The Menu On The Tv Screen; Activating The Surround Modes; Activating The Dsp Modes - JVC RX-8010RBK Instructions Manual

Using the On-Screen Menus

You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TV's input mode to the proper position to which the receiver is connected.
• When the TV's input mode is incorrect; for example, if a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
When you press MENU, "MENU"
appears on the display window
for about 10 seconds.
CATV/DBS VCR 1 TV AUDIO
DVD DVD MUILTI CD
FM/AM
TV/DBS VIDEO CDR PHONO
VCR 1 VCR 2 TAPE/MD USB
SURROUND DSP ANALOG/DIGITAL SLEEP
ON/OFF MODE INPUT
BASS ROOM
LINE DIF .ECT BOOST EFFECT SIZE
1 2 3
MIDNIGHT MENU
TEST CTR TONE LIVENESS
MODE
4 5 6
ENTER
SOUND SUBWFR L/R BAL CENTER
8 9
7/P
MENU
MUTING DIGITAL EQ REAR L REAR R
0
10 +10
100 +
RETURN FM MODE
CATV/DBS
CONTROL CONTROL
BAL L
CH/ LEVEL VOLUME
TV VOL
TV/VIDEO
BAL R
PLAY
EXIT
MENU
TEXT
/REW FF/
PAUSE
DISPLAY
SET
REC
PTY–PTY SEARCH–PTY
PAUSE
DISPLAY
MODE
STOP CONTROL
A/V CONTROL RECEIVER

Showing the MENU on the TV Screen

Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
Notes:
• "INPUT" appears only when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected. (See page 19.)
• If your TV is not of the PAL- or multi-color system, the TV
screen will be distorted.
• The on-screen display will disappear if no operation is done for
about 1 minute.
• The on-screen display is shown in black and white.
PLAY
EXIT
/REW FF/
PAUSE
SET
PTY–PTY SEARCH–PTY
DISPLAY
MODE
STOP
Use 5 / ∞ to move
up and down, and 2 / 3
to select, adjust or set
the item.

Activating the Surround Modes

(Also see page 31)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "SURROUND."
3. Press 2 / 3 to select the
Surround mode you
want to use.
4. When you finish, press
EXIT.
The menu disappears from the TV.

Activating the DSP Modes

(Also see pages 32 – 38)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "DSP MODE."
3. Press 2 / 3 to select the
DSP mode you want to
use.
4. When you finish, press
EXIT.
The menu disappears from the TV.
Note:
If "DVD MULTI" is selected as a playing source, the "SURROUND"
and "DSP MODE" do not appear on the display.

Selecting the Analog or Digital Input Mode

(Also see page 20)
This selection is only possible when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected (see page 19).
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "INPUT."
3. Press 2 / 3 to select the
analog or digital input
mode you want.
4. When you finish, press EXIT.
The menu disappears from the TV.
40