Using The On-Screen Menus; Selecting The Source To Play; Selecting Different Sources For Picture And Sound; Activating The Dsp Modes - JVC RX-7000RBK Service Manual

Using the On-Screen Menus

You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TV's input mode to the proper position to which the receiver is connected.
• When the TV's input mode is incorrect; for example, a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
TV/CATV/DBS VCR
DVD DVD MUILTI CD TAPE/MD
TV/DBS PHONO FM/AM
VCR ANALOG/DIGITAL SLEEP
SURROUND CENTER
1 2 3
ON/OFF
MENU
SURROUND TEST REAR-L
4 5 6
MODE
ENTER
CD-DISC EFFECT REAR-R
7 8 9
/P
SOUND
SEA MODE SUBWOOFER
0
10 +10
RETURN FM MODE 100+
AUDIO/
TV/VCR
MENU
CATV/DBS
SET
TEXT
EXIT
DISPLAY
TV VOL CHANNEL VOLUME
TV/VIDEO VCR TAPE/MD MUTING
CONTROL
PLAY
/REW FF/
PTY PTY SEARCH PTY
REC STOP PAUSE
DISPLAY MODE
RM-SRX7000R REMOTE CONTROL
Selecting the Source to Play (Also see page 10)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
MAIN MENU
SOURCE :CD
VISUAL :VCR
MODE :OFF
INPUT :ANALOG
SOUND CONTROL
TUNER CONTROL
SETTING
:OPERATE
VOLUME : 20
Notes:
• "INPUT" appears only when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected. (See page 16.)
• If your TV is not of the PAL-or multi-color system, the TV screen
will be distorted.
• The on-screen display will disappear if no operation is done for
about 1 minute.
2. Press % / fi to move
3. Press @ / # to select the source.
4. When you finish, press EXIT.
The menu disappears from the TV.
MENU
SET
EXIT
Shows the buttons you
can use on the current
menu.
In this case, use % / fi to
move up and down,
and @ / # to select,
adjust or set the item.
to "SOURCE."
Selecting Different Sources for Picture and
Sound (Also see page 11)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to "VISUAL."
3. Press @ / # to select a
different video source.
4. When you finish, press EXIT.
The menu disappears from the TV.
Activating the DSP Modes (Also see page 31)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to "MODE."
3. Press @ / # to select the
DSP mode you want to
use.
4. When you finish, press EXIT.
The menu disappears from the TV.

Selecting the Analog or Digital Input Mode

(Also see page 16)
This selection is only possible when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected.
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to "INPUT."
3. Press @ / # to select the
digital or analog input
you want.
For details, see page 16.
4. When you finish, press EXIT.
The menu disappears from the TV.
MAIN MENU
SOURCE :PHONO
VISUAL :VCR
MODE :OFF
SOUND CONTROL
TUNER CONTROL
SETTING
:OPERATE
VOLUME : 20
MAIN MENU
SOURCE :VCR
VISUAL :VCR
MODE :PRO LOGIC
SOUND CONTROL
TUNER CONTROL
SETTING
:OPERATE
VOLUME : 20
MAIN MENU
SOURCE :CD
VISUAL :VCR
MODE :OFF
INPUT :ANALOG
SOUND CONTROL
TUNER CONTROL
SETTING
:OPERATE
VOLUME : 20
34