Basic Operations; Turning The Power On And Off (Standby); Selecting The Source To Play - JVC RX-8010RBK Instructions Manual

Basic Operations

The following operations are commonly used when you play any sound source. You can also use on-screen menus for
most of the operations mentioned in this section. For details, see page 40.
Before using the remote control
How to confirm the remote control operation mode
The display window on the remote control shows following
information for about 10 seconds when you press certain buttons on
the remote control, so that you can confirm which operation you do.
Pressing one of the source selecting buttons,
the source name selected appears on the
display.
Buttons Indications
FM/AM
CD
PHONO
TAPE/MD
DVD or DVD MULTI
CDR
USB
TV/DBS
VCR 1
VCR 2
VIDEO
Pressing SOUND before you adjust the sound
effect, "SOUND" appears on the display.
Pressing TEXT DISPLAY or MENU before
you use on-screen menu or TEXT COMPU
LINK, "MENU" appears on the display (see
pages 40 and 47).
Pressing CONTROL or CATV/DBS
CONTROL before you operate an audio or
video equipment connected to the receiver,
the remote control operation mode selected
appears on the display (see pages 51 and 54).

Turning the Power On and Off (Standby)

On the front panel:
To turn on the power, press
STANDBY/ON .
The STANDBY lamp goes off. The name of the
current source and Surround/DSP mode appear
on the display.
Current source name and
Surround/DSP mode appear
L R
ANALOG
SPEAKERS
1
To turn off the power (into standby mode),
press STANDBY/ON again.
The STANDBY lamp lights up. A small
amount of power is consumed in standby
mode. To turn the power off completely,
unplug the AC power cord.
11
TUNER
CD
PHONO
TAPE
Ex.: When you
DVD
press CD.
CDR
USB
TV
VCR1
VCR2
VIDEO
Ex.: When you
press CATV/
DBS CONTROL.
STANDBY
STANDBY/ON
VOLUME
Current volume level appears
STANDBY
STANDBY/ON
From the remote control:
To turn on the power, press AUDIO
The STANDBY lamp on the front panel goes off.
The name of the current source and Surround/
DSP mode appear on the display.
To turn off the power (into standby mode), press AUDIO
again. The STANDBY lamp on the front panel lights up.

Selecting the Source to Play

Press one of the source selecting buttons.
The lamp on the front panel button for selected source lights up.
• The selected source name and Surround/DSP mode also appear on
the display.
On the front panel:
DVD MULTI DVD VCR 1 VCR 2
PHONO CD CDR TAPE / MD
SOURCE NAME
From the remote control:
DVD DVD MUILTI
TV/DBS VIDEO
VCR 1 VCR 2 TAPE/MD
Selected source name and current
Surround/DSP mode appear
DGTL AUTO DVD MULTI
L C R
ANALOG
SUBWFR LFE
LINEAR PCM
LS S RS
DIGITAL
SPEAKERS
1 2
DVD MULTI Select the DVD player for viewing the digital
video disc using the analog discrete output mode
(5.1 CH reproduction).
To enjoy the DVD MULTI playback, see page 39.
DVD
Select the DVD player.
VCR 1
Select the video component connected to the
VCR 1 terminals.
VCR 2 Select the video component connected to the
VCR 2 terminals.
VIDEO Select video component connected to the
VIDEO terminals.
TV (SOUND)/DBS Select TV sounds (or the DBS tuner).
PHONO
* Select the turntable.
CD * Select the CD player.
CDR
* Select the CD recorder.
TAPE/MD * Select the cassette deck (or the MD recorder).
USB (AUDIO)
* Select the personal computer (PC) connected
to the USB terminal.
FM/AM
* Select an FM or AM (MW/LW) broadcast.
• Each time you press the button, the band
alternates between FM and AM (MW/LW).
AUDIO
.
VIDEO TV SOUND/DBS
SOURCE NAME
USB AUDIO FM / AM
CD
FM/AM
CDR PHONO
USB
PRO LOGIC AUTO MUTING TUNED STEREO RDS EON
DSP 3D–PHONIC MIDNIGHT MODE TA NEWS INFO
HEADPHONE DIGITAL EQ INPUT ATT ONE TOUCH OPERATION
SLEEP VOLUME