JVC RX-8010RBK Instructions Manual page 58

To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CATV/DBS
2. Press CATV/DBS CONTROL.
3 Enter manufacturer's code using buttons 1–9,
and 0.
See the following lists to find the code.
4. Release CATV/DBS
The following buttons can be used for the CATV converter and
DBS tuner:
CATV/DBS :
CH +/–:
1 – 10, 0, 100+ (+10):
Note:
Refer to the manual supplied with your CATV converter or DBS
tuner.
5. Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Note:
You cannot use both of the CATV converter and DBS tuner at the
same time.
For DBS tuner
Manufacturer
JVC
AMSTRAD
BLAUPUNKT
ECHOSTAR
GOLDSTAR
GRUNDIG
HIRSHMANN
INSTRUMENT
ITT/NOKIA
KATHREIN
NEC
ORBITECH
PHILIPS
RCA
SAMSUNG
SCHWAIGER
SIEMENS
SONY
TECHNISAT
Manufacturers' codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
55
.
.
Turns on and off the CATV converter
or DBS tuner.
Changes the channels.
Selects the channels.
The 10 button will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
.
Codes
56, 57, 67
43, 44, 45, 46, 47, 48, 49
30
50, 51, 67
31
32, 33
48, 52, 53, 54, 55
68
34
52, 58, 59, 60, 61, 62, 63
35, 36
48
37, 38
65
39, 40
61, 64
41, 42
66
48
For CATV converter
Manufacturer
GENERAL INSTRUMENT 06, 07, 08, 09, 10, 11,
HAMLIN/REGAL
JERROLD
OAK
PANASONIC
PIONEER
SCIENTIFIC ATLANTA
TOCOM
ZENITH
Manufacturers' codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
To change the transmittable signals for
operating another manufacturer's VCR
1. Press and hold VCR 1
2. Press VCR 1.
3. Enter manufacturer's code using buttons 1–9,
and 0.
See the list on the next page to find the code.
4. Release VCR 1 .
The following button can be used for operating the VCR:
VCR 1 :
After pressing VCR 1, you can perform the following operations
on the VCR:
CH +/–:
1 – 10, 0, 100+ (+10):
3 PLAY:
REW:
FF:
7 STOP:
8 PAUSE:
REC PAUSE:
Note:
Refer to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR 1
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Codes
12, 13, 14, 29
01, 02, 03, 04, 05
06, 07, 08, 09, 10, 11,
12, 13, 14
15, 16, 17
18, 19, 20
21, 22
23, 24, 25
26
27, 28
.
Turns on and off the VCR.
Changes the TV channels on the
VCR.
Selects the TV channels.
The 10 button will function as the
ENTER button if your VCR requires
pressing ENTER after selecting a
channel number.
Starts playback.
Rewinds a video tape.
Fast winds a video tape.
Stops operation.
Pauses.
Enters recording pause.
.