Specifications - JVC RX-8010RBK Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-8010RBK:
Table of Contents

Advertisement

Specifications

Amplifier
-
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/DIN):
Frequency Response (8 ):
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
On-Screen Color System:
59
Output Power:
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels:
PHONO (MM):
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with
sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
USB:
Revision 1.0, full-speed (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
VCR 1, VCR 2, CDR, TAPE/MD:
Digital output:
Optical: DIGITAL OUTPUT:
PHONO (MM):
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
PHONO:
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
USB:
±1.0 dB (20 Hz to 20 kHz)
Bass boost:
+6 dB ±1.0 dB at 100 Hz
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
S-video:
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
VCR 1, VCR 2, MONITOR OUT:
S-video:
VCR 1, VCR 2, MONITOR OUT:
Negative
45 dB
PAL
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion. (IEC268-3/DIN)
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
2.5 mV/47 k
200 mV/47 k
0.5 V(p-p)/75
–21 dBm to –15 dBm (660 nm ±30 nm)
200 mV
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
70 dB/66 dB
87 dB/67 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 100 kHz (+1 dB, –3 dB)
20 Hz to 20 kHz (+1 dB, –3 dB)
(Y: luminance):
(C: chrominance, burst):
(Y: luminance):
(C: chrominance, burst):
at 1 kHz with no
at 1 kHz with no
at 1 kHz, with no more than
at 1 kHz, with no
1 V(p-p)/75
1 V(p-p)/75
0.286 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75
0.286 V(p-p)/75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents