Separate Scan] ([External Memory]) ([Save) - Olivetti d-COLOR MF652 Operation Manual
Box operations
Hide thumbs
Also See for d-COLOR MF652:
- User manual (285 pages) ,
- Operation manual (253 pages) ,
- Network fax operations (166 pages)
Table of Contents
Advertisement
15
Settings
[Binding Position]
[Frame Erase]
[Center Erase]
[Separate Scan] ([External Memory]) ([Save])
To display: [Box] - [System] - [External Memory] - [Save] - [Application] - [No. of Originals] - [Separate Scan]
If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
You can also scan the original using both the ADF and Original Glass alternately.
d
Reference
For details on how to operate Separate Scan, refer to page 14-9.
15-196
Description
If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Out-
put Method], select the spreading direction of the original to be scanned.
Select [Left Bind] for two-page spreads of left binding, and [Right Bind] for
two-page spreads of right binding.
Note that if the binding position is incorrectly specified, the page order of
the two-page spread is reversed between the left- and right-hand pages.
Erases the shadow of the surrounding that is created when the original
cover cannot be closed properly due to the thickness of the original.
You can erase the four sides of the original to the same width. Also, you
can erase the four sides of the original to different widths.
•
[Frame]: Select this option to erase the four sides of the original to the
same width. In [Erase Amount], tap [+]/[-] for the inch area, or tap [+]/[-
] or press the Keypad for the centimeter area to specify the width of the
area to be erased.
•
[Individual]: Select this option to erase the four sides of the original to
different widths. Select a side ([Top][Bottom][Left] or [Right]) and spec-
ify the width of the area in [Erase Amount] by tapping [+]/[-] for an inch
area and by tapping [+]/[-] or pressing the Keypad for a centimeter ar-
ea. Likewise, specify the width for all the other sides one by one.
If you do not want to erase the side, cancel the setting for [Erase].
Erases the shadow created in the center when the original cover cannot be
closed properly due to the thickness of the original.
Specify the width of the area to erase by tapping [+]/[-] for the inch area, or
by tapping [+]/[-] or pressing the Keypad for the centimeter area.
d-Color MF752/652
Advertisement
Table of Contents
