Camera Connection - EverFocus ENVR8304D User Manual

2.3.1 Camera Connection

ENVR8304D: Connect the LAN Port to the Uplink port of the PoE device (NVR Smart Switch)
using the supplied RJ-45 Cable. Connect the IP cameras to the 1~8 camera ports to the PoE port
1~8 using Ethernet cables.
ENVR8304E: Connect the LAN Port to the Uplink port of the NVR using the supplied RJ-45 Cable.
Connect the IP cameras to the 1~8 camera ports to the PoE port 1~8 using Ethernet cables
Note:
1. If the length between the PoE switch and the IP camera exceeds 100 meters, please see
2.3.2 Cable Length Extension for cable length extension instruction.
2. The total PoE power budget is 130W; please make sure the total Power Consumption of
all the connected IP cameras doesn't exceed 130W.
ENVR8304D:
ENVR8304E:
NVR Smart Switch
IP Cameras 1 ~ 8
IP Cameras 1 ~ 8
Connect the two ports using
the supplied RJ-45 Cable
Figure 2-9
ENVR8304D-8CH / ENVR8304E-8CH
16