EverFocus ENVR8304D User Manual page 24

ENVR8304E:
1
Power Cord
1. Using the supplied Power Cord, connect one end to the 100-240 VAC~ port on the NVR and
the other end to the 100-240 VAC~ power outlet.
2. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
3. Connect the IP cameras to the 1~8 camera ports using RJ-45 CAT5 10/100Mb Ethernet
cables without separate power sources. Please see 2.3.1 Camera Connection for more
details.
4. To manage the NVR over network, use a standard RJ-45 CAT5 10/100/1000Mb Ethernet
cable to connect the WLAN port of the NVR to the network. Please refer to 2.5 Connecting
the NVR to the Network.
5. Connect the LAN port of the NVR to the Uplink port (9TX) using the supplied RJ-45 CAT5
10/100/1000Mb Ethernet cable. Please see 2.3.1 Camera Connection for more details.
6. Optionally connect a mouse or a keyboard (EKB200) to the NVR to control the system. You
can also control the system using the supplied IR Remote Controller.
7. Connect a microphone to the Audio-in RCA socket of the NVR. Note that the microphone
with a (built-in) amplifier and external power supply is required.
8. To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note
that the speaker with a (built-in) amplifier and external power is required.
IP Cameras 1 ~ 8
3
2 4
Network
Main Monitor Main Monitor
(VGA)
(HDMI)
Web Remote
Client
Figure 2-8
15
ENVR8304D-8CH / ENVR8304E-8CH
Mouse &
EKB200 Keyboard
6 7
5
PowerVideo Plus
(CMS)
Line Level
Audio In
8
Line Level
Audio Out