EverFocus ENVR8304D User Manual page 79

* Flicker: Check the box to enable the Flicker function. Please enable this function only if flicker
artifacts are observed.
*【Exposure Settings】 This setting is used to adapt to the amount or type of light used by the
camera.
* Mode:
ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry

to either take bright spots more into consideration (peak), bringing out detail in bright
areas, or less into consideration (average) bringing out detail in shadows.
AES (Iris Priority): Selecting AES (Auto Electronic Shutter) disables the Shutter setting

below this setting. In this mode, the camera measures the light level and decides whether
it needs more or less light and then automatically adjusts the shutter speed accordingly.
You can further adjust the Iris (P-Iris) value.
Auto: Selecting Auto for the camera to automatically adjust the Iris and Shutter based on

the measured light level.
* Shutter: If enabled, this setting lets you set the shutter speed yourself (measured in fractions
of a second).
* Flickerless: The function is only activated if you select Auto in the Mode field. Choose between
OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance).
Brightness: Move the bar to adjust the brightness.
Contrast: Move the bar to adjust the contrast. (The function can only be used when the
camera has the contrast function)
Color: Move the bar to adjust the color.
Sharpness: Move the bar to adjust the sharpness.
Apply To: Click the button to apply the same settings to the desired cameras.
Save: Click to save the settings.
ENVR8304D-8CH / ENVR8304E-8CH
70