6.1.2
Basic
Channel Number: Select a desired channel for configuration.
Device Title: Enter a camera title.
Record Dual Stream: Select to enable or disable the dual streams recording function.
Record Mode: Select a recording mode from the drop-down list.
Normal+Event: Set all cameras to the Continuous and Event recording mode.
Event Only: Set all cameras to the Event only recording mode.
Record Audio: Check the box to enable audio recording on the NVR.
Note:
1. The Audio function is unavailable for Germany
2. The NVR provides a line-in RCA socket, therefore, an RCA microphone with a
(built-in) amplifier and external power supply is required.
Frequency: Select 50hz if you camera is using the PAL scanning system or 60hz for the NTSC
scanning system.
ENVR8304D-8CH / ENVR8304E-8CH
Figure 6-4
60