EverFocus ENVR8304D User Manual page 54

To enter the Zoom mode:
1. Select a camera and then click the Zoom button
in the camera view to 2X. The ZOOM 2X stamp will be displayed on the top screen.
2. Navigate the camera view to the desired position by moving your mouse cursor over the
camera view. The mouse cursor will turn into a direction icon when you move your
mouse cursor to different portion on the camera view. Click directly on the screen can
move to that direction.
3. Right-click the screen, the Zoom Bar appears in the middle of the screen.
4. Click to zoom in the camera view up to 4X.
5. Click the Logout button
Figure 4-7
to log out the Zoom mode.
45
ENVR8304D-8CH / ENVR8304E-8CH
on the OSD Root Menu to zoom