2. Connection and Installation
2.1 Storage Installation
The eIVP1300 supports mSATA drive (half size) and 2.5" SSD for storage. You can install either
one for storage.
To install the mSATA (half size) drive:
1.
Make sure the NVR is power-off.
2.
Unscrew the four screws on the rear panel and then remove the cover from the housing.
3.
Find the mSATA Interface on the motherboard and then screw your mSATA (half size) drive
to the mSATA Interface using the supplied mSATA Screw.
mSATA Interface
5
eIVP1300 AI Mobile NVR
Chapter
2