Hard Disk Compatibility List; Basic Connection - EverFocus VANGUARD II 4x2H Quick Installation Manual

04ch, h.265, 8mp xvr
Hide thumbs Also See for VANGUARD II 4x2H:
Table of Contents

Advertisement

2.2 Hard Disk Compatibility List

Please go to EverFocus' Website www.everfocus.com.tw, and go to Support > Product Marketing
to search for and download the Storage Compatibility Table. It's recommended to use the hard
disk models listed on the table to ensure your hard disks will be compatible.
Note: If using two or more hard disks, please choose the hard disks with the same capacity.

3. Basic Connection

The instructions below describe the basic connection to the DVR.
3.5" HDD
1
1. To record videos, install 3.5" HDD(s) to the DVR. Please refer to 2.1 Hard Disk Installation.
2. To listen to the audio from device side, connect speakers to the audio output. Note that the
speakers with a (built-in) amplifier and external power supply are required.
3. To connect to the TVI/AHD/SD cameras, connect the cameras to the BNC ports.
4. Connect microphones to the audio input ports to transmit audio from the camera to the DVR.
Note that the microphones with a (built-in) amplifier and external power supply are
required.
5. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or
VGA cable supplied by the monitor manufacturer.
6. Use a standard RJ-45 CAT5 Ethernet cable to connect the DVR to the network and then
optionally connect IP cameras to the DVR.
7. Optionally connect a mouse to the DVR to control the system.
8. Use the supplied Power Cord and Adaptor to connect the DVR to the power outlet.
TVI/AHD/SD Camera
3
CVBS
2
4
Line Level
Audio Input
Line Level
Audio Out
Main Monitor
(HDMI / VGA)
Mouse / USB Storage
7
5
6
Network
IP Cameras
Web Remote Client
4
8
Power Supply
VANGUARD CMS

Advertisement

Table of Contents
loading

Table of Contents