EverFocus ENVR8304D User Manual page 49

9. To operate the Auto Pan function, click the Auto Pan button.
10. To operate the Pattern function, click the Pattern button. The Pattern is the "0" Tour in
EverFocus and Pelco PTZ cameras.
11. To operate the Tour function:
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Go button.
12. To remove a pre-configured Tour (if supported by the camera):
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Delete button.
13. To start the auto-tracking function, click the Track button.
14. To start tracking a selected object on the screen, click the Object button. When the object
selection box displays on the screen, click to select an object to start auto tracking. Once
the PTZ camera loses track of the object, the camera will return to the auto tracking start
point. Please select forward position in the object movement path to get better tracking
result.
Click C to clear the entered number in the Number Box.
Click at the top-right corner to hide the PTZ Control Panel (see 4.1.1 Express Control of
PTZ). To display the PTZ Control Panel, right-click on the screen.
Click Logout to close the PTZ Control Panel and exit the PTZ mode.
Note: Before start using the Auto Pan, Pattern, Tour, and Tracking functions, you have to
configure the related settings for the connected PTZ cameras. Please refer to 6.1 Camera or
the User's Manual of your PTZ cameras.
ENVR8304D-8CH / ENVR8304E-8CH
40