2. The position of each device on the OSD layout represents the physical positions of
your monitors which you should arrange and place in the setup environment.
3. Click an IP address field to enter the IP address of a Sub Server and the first Sub Server
must be adjacent to Main Server on the OSD layout (DVR 2 or DVR 5), or it won't work.
Figure 6-16
4. Set up the rest of the Sub Servers by entering their IP addresses, and please note that
the Sub Servers must be adjacent to one another on the layout, or it won't work.
Figure 6-17
5. Click Save to save the setting.
ENVR8304D-8CH / ENVR8304E-8CH
Main Server
Sub Server
Monitor
Monitor
Figure 6-15
72