Transpose Button; Function Button - Korg Stage Vintage SV-1 User Manual

12 – Controls and connections | Front panel

TRANSPOSE button

Use this button to transpose your keyboard. See "Transposing" on page 26.
LOCAL OFF button
Here you can turn the Local Off function on or off. When you turn the LED of this
button on, the keyboard is disconnected from the internal sounds. By playing the key-
board, you cannot hear any sound from the internal tone generator. However, notes
continue to be sent to the MIDI OUT port (or the USB port), and can be received by a
computer. The computer sends them back again to the SV-1's MIDI IN port (or the
USB port), and then to the internal tone generator. This routing allows you to record
and play at the same time, without duplicate notes.
TOUCH button
Use this button to adjust the sensitivity of your keyboard. See "Changing the touch
sensitivity" on page 29.

FUNCTION button

Use this button to make MIDI and tuning settings, to adjust the RX Noise component
volume, to adjust the Layer volume, or to restore the instrument to the default config-
uration. When pressing it, a LED around the TREBLE and BASS knobs, and the
FUNCTION #1 button, may start blinking.
FUNCTION, then ...
EQ - TREBLE
EQ - BASS
FAVORITES 1 – 8
NOTES C6 – D#7
Does this
Adjust fine tuning. See "Fine tuning the instrument" on page 27.
Adjust the volume of the RX Noise component of the sound, or the volume of the Layer.
See "Adjusting the RX Noise or the Layer level" on page 31.
Selects the corresponding tuning curve (out of 8). See "Choosing a tuning curve" on
page 28.
Select the corresponding MIDI channel (out of 16). See "Choosing a MIDI channel" on
page 31.
8 9 0 A