Rear Panel - Korg Stage Vintage SV-1 User Manual

R
EAR PANEL
The back panel is where you can find most of the connections.
1
3 4
POWER connector
Connect the included IEC power cable here.
MUSIC STAND holes
A music stand comes standard with your SV-1. Insert its legs into these two dedicated
holes.
USB DEVICE connector
Use this connector to connect a computer for sequencing (this doubles the MIDI
ports), or for using the SV-1 Editor software for fine editing. Before using this connec-
tor, please install the KORG USB-MIDI Driver (the relevant instructions are provided
together with the MIDI Driver on the Accessory Disk, or can be downloaded from our
web site).
PEDAL jacks (DAMPER, 1, 2)
Connect the supplied Korg DS2H pedal to the DAMPER jack. Connect a footswitch to
PEDAL 1 and either a footswitch or an expression pedal to PEDAL 2.
DAMPER always operates as a damper pedal. Use it to connect the supplied Korg DS-
2H damper pedal.
Controls and connections | Rear panel – 15
2
5 6 7