Introduction - McQuay WMC Installation, Operation And Maintenance Manual

This manual provides installation, operation, and maintenance information for McQuay WMC Magnitude
the MicroTech II controller.
®
Electric shock hazard. Improper handling of this equipment can cause personal injury or equipment damage. This equipment must
be properly grounded. Connections to and service of the MicroTech
knowledgeable in the operation of the equipment being controlled.
Static sensitive components. A static discharge while handling electronic circuit boards can cause damage to the components.
Discharge any static electrical charge by touching the bare metal inside the control panel before performing any service work.
Never unplug any cables, circuit board terminal blocks, or power plugs while power is applied to the panel.
NOTICE
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with this instruction
manual, it may cause interference with radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the owner will be required to correct the interference at the owner's own expense.
Daikin Applied disclaims any liability resulting from any interference or for the correction thereof.
Dangers indicate a hazardous situation, which will result in death or serious injury if not avoided.
Warnings indicate potentially hazardous situations, which can result in property damage, severe personal injury, or death if not
avoided.
Cautions indicate potentially hazardous situations, which can result in personal injury or equipment damage if not avoided.
www.DaikinApplied.com
WARNING
CAUTION
HAZARD IDENTIFICATION INFORMATION
DANGER
WARNING
CAUTION
3
II control panel must be performed only by personnel that are
®
IOM 1210-1 • MAGNITUDE
I
nTroduCTIon
I
nTroduCTIon
centrifugal chillers with
®
MODEL WMC CHILLERS
®