PRESONUS StudioLive 24.4.2 Owner's Manual page 88

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.2 Virtual StudioLive
Loading an Entire Fat Channel Preset
Loading an FX Preset
Loading a GEQ Preset
82 82
To load every component in a Fat Channel preset (Gate, Compressor, EQ,
etc.), select it from the Browser window an drag it over any part of the
desired channel. If you drag it over any of the component quick views, it
will load only that component (e.g., if you drag a preset over the Gate
Quick View, only the Gate will be loaded).
To load an FX preset, select it from the Browser window and drag it over
any part of the desired FX bus in the Master section of the Overview tab.
Once it is loaded, you can use the FX Type menu to change the effect and
create new presets.
Note: At this time, VSL does not transfer the name of the preset to the
StudioLive. All FX presets loaded from within VSL will be labeled "Natural"
in the FX menu on your StudioLive.
To load a Graphic EQ preset, select it from the Browser window and drag
it over any part of the focused graphic EQ. Graphic EQ presets can be
loaded on the Overview tab or the GEQ tab. Once a preset is loaded, you
can use the sliders in VSL, or the encoders on the StudioLive, to make
adjustments. Note that you must be in the GEQ menu page for the
Graphic EQ you wish to control in order to use the encoders on your
StudioLive to control each graphic EQ in VSL. See next section for details.
PreSonus StudioLive 24.4.2
™