Direct Connection To One Studiolive Rm; Mixer - PRESONUS StudioLive CS18AI Owner's Manual

2 Getting Started
2.3 Step 3: Network Your CS18AI
2.3.1 Direct Connection to one StudioLive RM Mixer
Your StudioLive CS18AI can be connected to a single StudioLive RM-series
mixer without the need for a switch or router between the two devices.
To connect directly between an RM-series mixer and a CS18AI, you must first connect
the RM-series mixer to UC Surface and select a self-assigned IP address. Please refer
to the StudioLive Software Library Reference manual for complete instructions.
1. Connect a CAT5e or CAT6 cable from the AVB port on the rear panel
of the CS18AI to the Control port on the RM-series mixer.
2. Press the UCNET button in the Master Control area.
3. On the CS18AI touchscreen, press the Settings button in the Wired IP column.
4. On the CS18AI touchscreen, select the "Static Self-Assigned" tab.
STUDIOLIVE RML32 Phones
Power
32X25 Digital Mixer 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32 XMAX Preamps
96k/24bit Audio
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
USB
1 2 3 4 5 6 7 8 9 10
17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26
1 2 3 4 5 6 7 8 9 10
StudioLive CS18AI
™
Owner's Manual
Tape In Mono Out Main Out
L
R
-80 +6 -80 +6
Level Level
Left Right
11 12 13 14 15 16
MIC / LINE INPUT
27 27 28 28 29 29 30 30 31 31 32 32
MIX OUTPUT
11 12 13 14 15 16
12