PRESONUS StudioLive 24.4.2 Owner's Manual page 18

3 Hookup
3.1 Rear-Panel Connections
12 12
Talkback Mic Level. This is the trim control for your talkback microphone. It adjusts
the gain of the talkback input.
Mono Output. This balanced output carries a mono, summed version of the stereo
signal from the main bus.
Mono Output Level. This knob controls the maximum level of the Mono Output
signal. The signal can be attenuated to -80 dB and boosted up to +6 dB.
Main Output. The StudioLive features both XLR and TRS main outputs. These
outputs are parallel to each other and to the mono output.
Main Output Level. This knob controls the maximum output level of the XLR and
TRS main outputs. The signal can be attenuated to -40 dB and boosted up to 0 dB.
Power User Tip: All the main outputs (XLR Stereo, TRS Stereo, and XLR Mono) of the
StudioLive are active all the time. Because of this, you can send your main mix to five
speakers at the same time. This can be especially useful when you need to send a mix
to another room or add another set of speakers to accommodate a larger venue.
Tape In/Out. The StudioLive is equipped with stereo RCA (coaxial) inputs and
outputs that can be used to connect a tape deck, CD player, or other consumer
device. The tape-input level is controlled by the 2 Track In knob on the top panel. The
main bus is routed post-fader to the tape output.
CR Output. These are the balanced control-room outputs. The level is controlled by
the Monitor knob in the Monitor section on the top panel.
PreSonus StudioLive 24.4.2
™