PRESONUS StudioLive 24.4.2 Owner's Manual page 66

5 Scenes, Presets, System Menu, and MIDI Control
5.4 System Menu
60 60
Speaker delay can also be used to correct off-axis phasing issues in small clubs.
Because of space restrictions, you can't always place your main speakers for
the best possible sound reproduction. Sometimes your left-side speaker will
need to be closer to the audience to make room for a pillar or a staircase or
the bathroom, so an audience member standing in the center of the room
will not have the best listening experience. By using a pair of subgroups as the
source for your mains, you can factor in that 2 to 4 ms delay the left speaker
needs so that unbalanced speaker placement is no longer an issue.
Right out of the box, the StudioLive cannot be locked, so don't worry
about hitting the wrong button. To enable the Lockout feature, you
must first connect and sync your StudioLive to a computer. Please
review Section 7.2.6 for more information on this feature.
PreSonus StudioLive
Lockout Mode
Your StudioLive features a Lockout mode that
allows you to create a password and lock the
controls. This is especially useful in situations
where several people will be running sound but
only one or two are knowledgeable enough to
set up dynamics processing and the like.
Firmware Version
Press the Page Down button to view the firmware
version currently loaded on your StudioLive.
You normally will only view this screen when
performing a system update, in order to confirm
that the new firmware was successfully loaded.
24.4.2
™