Dexter Laundry T-900 Operator's Manual page 16

Industrial washer model t-900/950 on-premise n-series control
Table of Contents

Advertisement

3.1.6 Press "ENTER" to display the settings.
Available settings to alter in each bath are Cycle Time, Water
Temperature, Water Level, Injection Source, and Spin Time.
3.1.7 Input settings.
The first setting to alter is the Cycle Time as indicated by the
"CYCLE TIME" LED. Use the "DOWN" and "UP" keys to set the
desired time in minutes and press "ENTER" to advance to the next
setting. If no change is desired, press "ENTER" to advance to the
next setting.
Repeat process for each setting. Each bath setting can be
programmed with the options shown in Table 5.
1
water level. However, fill time from low to high water level is included as
computer operates during this period.
2
result in a heated bath if temperature of fill water is less than programmed
temperature.
3
the Water Temperature setting, the electronic controller prohibits injection
signals. The programmed injection source value is ignored.
When the final desired Spin Time setting is selected, press
"ENTER". The Spin Time is entered, The "SPIN TIME" LED turns
off, and the editing of the selected bath is complete. The next
sequential bath light is immediately illuminated.
8514-244-001 REV PR page 16
SETTING
OPTIONS
1
Cycle Time
Two-digit amount of time for bath tumble in minutes.
-
-
Water
HH for hot water
2
Temperature
CH for warm water
CC for cold water
EE for no water
Water Level
LO for low level
HI for high level
Injection
Two-digit code indicating injector signal(s), 00 to 06.
3
Source
Spin Time
Two-digit amount of time for spin in minutes.
-
-
Table 5: Bath Program Settings
Cycle times are approximate and do not include fill time from empty to low
For models with electric heat, entering a temperature value of 20°-90°C will
Codes for injections sources are defined in Table 3. When "EE" is selected in
00 to 30 minutes for Flush, Prewash, Wash,
Rinse 1, 2, 3, 4 and 5. If the time is set to 00,
then the bath will be eliminated from the
cycle.
01 to 30 minutes for Final Rinse.
3
00 to 10 minutes for Flush, Prewash, Wash,
Rinse 1, 2, 3, 4, and 5
01 to 10 minutes for Final Rinse

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T-950

Table of Contents