Requirements And Specifications; Additional Resources - Control 4 HC-250 Installation Manual

HC-250 Controller
Installation Guide
clignoté 12 fois par seconde. Après la période
de 10 secondes de clignotement, le circuit de
sur-courant sera réactivé. Si la condition de
surintensité reste donc la même, la séquence
se répète.
For more information, refer to the Products or
Documentation pages at www.control4.com.

Requirements and Specifications

NOTES:
(1) We recommend using Ethernet rather than
WiFi for the best network connectivity.
(2) The Ethernet or WiFi network should
be installed prior to starting the HC-250
installation.
(3) The HC-250 is only compatible with PoE
injectors that have DC ground isolated from
AC ground. The easiest way to determine if
this is the case is to use PoE injectors that only
have a two-prong AC power cord. You can find
additional PoE information on the Control4
Knowledgebase.
(4) Ferrite clamp installation. When installing
a Control4® HC-250 Controller, also install the
enclosed ferrite clamps as described in this
document.
Ethernet cable. Install two (2) ferrite clamps
on the Ethernet cable no farther than 6 inches
from the HC-250 Ethernet jack.
Video cable. Install two (2) ferrite clamps on
each end of the HDMI or Component video
cable no farther than 6 inches from the HC-
250 and the TV.
2
™
The software required to configure this device is
Composer Pro. See the Composer Pro User Guide for
details.
HC-250 Specifications
Model Number
Network
Media Recognition
Video
Audio Playback Formats
Display
Power Requirements
Power Consumption
Operating Temperature
Storage Temperature
IR Out
IR Capture
Contact (1)
Relay (1)
Dimensions (H x W x D)
Weight
Shipping Weight

Additional Resources

The following resources are available for more
support.
• Control4 Knowledgebase and Forums
• Control4 Technical Support
• Control4 website: http://www.control4.com
• Composer documentation in online help or PDF
format available on the Dealer portal
C4-HC250-BL
Ethernet—required
WiFi (only supported
when the unit is used in a
single-Controller system or as a
Secondary Controller)
Online CD/DVD/Blu-ray
recognition and media information
service. Supports MP3, AAC, FLAC.
HDMI 1.4 output; Component
Video output; SD 480I; HD 720p,
50-60Hz.
MP3: 32kbps to 320kbps, CBR,
VBR, AAC, and FLAC
LED indicators
100-240 VAC, 60/50 Hz, 0.25 A
PoE requirement: 13W
Max: 44W, 150 BTUs/hour.
Idle: 24W, 82 BTUs/hour
32˚ - 104˚ F (0˚ - 40˚ C)
-4˚ - 149˚ F (-20˚ - 65˚ C)
5V 27 mA max/output
0-60 KHz
DC - 36V maximum operation (low
voltage)
Maximum output current for 12V
rail: 125mA
AC - 36V, 2A
DC - 24V, 2A
maximum operation (low voltage)
1.23" (31.19 mm) x 8.59" (218.13 mm)
x 4.92" (125.01 mm)
1.3 lbs/0.589 kg
2.7 lbs/1.224 kg