Initialization; Clear All Memory; Clear All Codes; Clear All Schedules - Digital Monitoring Products XR500 Series Programming Manual

InItIalIza tIon
NOTE:
WHEN ANY PANEL PROGRAMMING IS CHANGED, THE STOP ROUTINE MUST BE RUN AND 'SAVING
PROGRAM' MUST DISPLAY ON THE KEYPAD IN ORDER TO SAVE THE PROGRAMMING CHANGES. SEE SECTION 17.1.
2.1

INITIALIZATION

2.2
INIT ALL? NO YES
SURE? YES
2.3
CODES? NO YES
SURE? YES
2.4
SCHEDS? NO YES
SURE? YES
2.5
EVENTS? NO YES
SURE? YES
2.6
ZONES? NO YES
SURE? YES
2.7
AREAS? NO YES
SURE? YES
2.8
OUTPUTS? NO YES
SURE? YES
2.9
COM/RMT? NO YES
SURE? YES
2.10
DEFAULTS NO YES
SURE? YES
Digital Monitoring Products
6

Initialization

Initialization
This function allows you to clear selected parts of the panel program back to the factory
defaults in preparation for system programming. Run the initialization function on all
new installations.
For each section of the panel program you
can initialize, a NO or YES option is provided.
CODES? NO YES
Selecting NO advances
you to the next prompt.
SCHEDS? NO YES

Clear All Memory

NO NO - Leaves existing programming intact then displays Clear All Codes.
YES - Clears all memory then displays Reset Panel. Reset the panel by shorting J16 and
re-enter programming mode to continue.

Clear All Codes

NO - Leaves existing codes intact.
NO
YES - Clears the user code and user profile memory and assigns user code number 99 to
the highest user position.
Note: The user name for the default user code is created using the current programmed
primary user language.

Clear All Schedules

NO NO - Leaves existing schedules intact.
YES - Clears all shift, and output schedules.

Clear Display Events Memory

NO - Leaves existing event memory intact.
NO
YES - Clears the events memory.

Clear Zone Information

NO - Leaves existing zone information intact.
NO
YES - Clears the zone information for all zones. All zones are marked * UNUSED * and
must be renamed before being able to display on any system keypad.

Clear Area Information

NO NO - Leaves existing area information intact.
YES - Clears the area information for all areas. All areas are marked * UNUSED * and must
be renamed before being able to display on any system keypad.

Clear Output Information

NO NO - Leaves existing output information intact.
YES - Clears all programmed Output names and any output cutoff assignment.

Clear Communication and Remote Options

NO NO - Leaves existing communication and remote options intact.
YES - Clears communication and remote options programming to factory defaults.

Set to Factory Defaults

NO NO - Leaves existing panel programming intact.
YES - Sets the remainder of the panel programming back to the factory defaults.
Note: Sets the Programming and User language to English.
Selecting YES advances you to
a confirmation prompt.
SURE?
YES NO
If you select YES, the panel initializes that section of
the program and advances you to the next prompt.
If you select NO, the panel advances you to the next
section prompt but does not initialize that section of
the program.
XR500 Series Programming Guide