INITIALIZATION
INITIALIZATION
CODES?
NO YES
SCHEDS?
NO YES
EVENTS?
NO YES
ZONES?
NO YES
COMM?
NO YES
CLEAR WIFI
NO YES
DEFAULTS?
NO YES
XTLplus Series Installation and Programming Guide | Digital Monitoring Products
Initialization
This function allows you to set the panel's programmed memory back to the factory
defaults.
After you select YES to clear a section of memory, the panel asks if you are sure you
want to clear the memory. This is a safeguard against accidently erasing part of your
programming. No memory is cleared from the programming until you answer YES to
the SURE? YES NO option.
Clear All Codes
NO leaves existing user codes intact.
YES clears the user code memory and assigns the user code number 99 to user 99 on
the XTLplus.
Clear All Schedules
NO leaves existing schedules intact.
YES clears all schedules from the XTLplus programming.
Clear Events
NO leaves existing event memory intact.
YES clears all event memory currently held in the panel's Display Events buffer.
Clear Zone Programming
NO leaves existing zone information intact.
YES sets all zones in the system to UNUSED.
Clear Communication
NO leaves existing communication and messaging programming intact.
YES resets communication and messaging programming to factory defaults.
Clear Wi-Fi
NO leaves existing Wi-Fi programming intact.
YES resets Wi-Fi programming to factory defaults.
Set to Factory Defaults
Only use this procedure when the network primary controller is missing or otherwise
inoperable.
NO leaves the remainder of the existing panel programming intact.
YES sets the panel's programming back to factory default selections. Selecting YES
does not clear the panel's event memory, zones, user code information, or schedules.
11