Kyocera TASKalfa 1801 Operation Manual page 134

Hide thumbs Also See for TASKalfa 1801:
Table of Contents

Advertisement

Troubleshooting > Error Code List
Error Code
U01600
U01700 - U01720
U01721
U01800 - U01820
U01821
U05100
U05200
U05300
U19000
U19100
Communication error occurred during reception of high-speed transmission. Ask the sender to reduce
the transmission speed and send again.
NOTE
If the communication error occurs frequently, change the default setting of RX Start Speed in
System Menu.
Communication error occurred during high-speed transmission. Send again.
If you still have trouble, reduce TX Start Speed and send again.
NOTE
If the communication error occurs frequently, change the default setting of TX Start Speed in
System Menu.
Communication error occurred during high-speed transmission. Designated transmission speed may
not be available for the recipient machine.
Reduce the transmission start speed and send again.
Communication error occurred during reception of high-speed transmission. Ask the sender to reduce
the transmission speed and send again or reduce the RX Start Speed in System Menu.
Communication error occurred during reception of high-speed transmission. Designated transmission
speed may not be available for this machine. Ask the sender to reduce the transmission speed and
send again or reduce the RX Start Speed in System Menu.
Transmission was canceled because communication requirements are not met due to the
transmission restriction set on this machine. Check with the recipient.
Reception was canceled because communication requirements are not met due to the reception
restriction set on this machine.
Reception was rejected by the recipient because communication requirements are not met due to the
reception restriction set on the recipient machine. Check with the recipient.
Memory reception was stopped because there is no more free space in the memory of this machine.
Create free space by outputting the data stored in the memory, and ask the sender to resend.
Transmission was stopped because there is no more free space in the memory of the recipient
machine. Check with the recipient.
Possible Cause/Action
10-6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 2201

Table of Contents