Mitsubishi Electric GOT 1000 Connection Manual page 42

2 Checking communication state of GOT
(1) When using Command Prompt of Windows
Execute a Ping command with Command Prompt of Windows .
(a) With normal communication
C:\>Ping 192.168.0.18
Reply from 192.168.0.18: bytes=32 time<1ms TTL=64
(b) With abnormal communication
C:\>Ping 192.168.0.18
Request timed out.
(2) When using Ping test of GT Designer2
Select [Communication]
for using the Ping test.
(3) With abnormal communication
Check the following, and then execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connection condition
• Setting details of [Communication Settings]
• GOT IP address specified for the Ping command
2 - 20
2.2 Preparatory Procedures for Monitoring
2.2.7 Checking if GOT correctly monitors controllers
[Communication Configuration]
Ethernet diagnostics function of FX Configurator-EN
With the Ethernet diagnostics function of FX Configurator-EN, the Ping test can be
executed via the programmable controller.
For details on the Ethernet diagnostics function of FX Configurator-EN, refer to the
following manual.
FX Configurator-EN OPERATION MANUAL
[Ethernet]
1 Specify [GOT IP address] for the Ping
test, and then click the
2 [Test Result] is displayed when the Ping
test ends.
from the menu
Test
button.
PING Test