Mitsubishi Electric GOT 1000 Connection Manual page 40

(2) GT15
2 - 18
2.2 Preparatory Procedures for Monitoring
2.2.6 Checking if GOT recognizes controllers
When changing communication interface settings with utility
The communication interface settings can be changed with the utility.
For details on the utility, refer to the following manual.
GT User's Manual
1 After turning on the GOT, touch [Main
Menu] [Communication Setting] from
the utility.
2 The Communication Setting screen is
displayed.
3 Check that the following communication
driver name is displayed in the box for
the communication interface to be used.
• Communication driver: Ethernet (FX)
4 When the communication driver name is
not correctly displayed, carry out the
following procedure again.
Section 2.2 Preparatory
Procedures for Monitoring