Toshiba e-studio2050c Troubleshooting Manual page 121

7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Failure in making meta data
2E45
There are too many documents in the folder.
2E65
Failure in creating a new document
Failed to process your job. Insufficient
Storage space.
2E66
2EC0 Job canceled
Power failure occurred
2EC1
Remote Scan, WS Scan, File Downloader
Failure to acquire resource
2A20
WS Scan function is not available
2A31
System fatal error
2A40
2A50 Job canceled.
Power failure occurred
2A51
Authentication for WS Scan failed
2A60
Insufficient permission to execute Remote
2A70
Scan
Insufficient permission to execute WS Scan
2A71
Insufficient permission to access e-Filing
2A72
box using scan utility
Store to e-Filing
Job status failed
2B11
Failure to access file
2B20
Insufficient disk space
2B30
Problem Description
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Corrective Action
Make sure that the template setting is
correct, and do the scanning again. If the
error still persists, turn the power OFF and
then back ON, and then try again.
Delete the data in the local storage folder in
the equipment and try scanning again.
Reduce the number of pages of the problem
job and try again. Check whether the server
or local disk has sufficient space in its
capacity.
The job was canceled.
Make sure that the power cable is
connected properly and is inserted securely.
Resend the job.
Reattempt the problem job. If the error still
persists, turn the power OFF and then back
ON, and make another effort.
Check if the WS Scan function is enabled. If
not, change it to "enabled".
Turn the power OFF and then back ON. Try
scanning again.
The job was canceled.
Make sure that the power cable is
connected properly and is inserted securely.
Resend the job.
When Fax & Scan of Windows is used with
the WIA driver, check if the user name for
the login is registered. When the control
panel or EWB of the equipment is used,
check if the user name for the login is
registered.
Check if the user is authorized to perform
this job.
Check if the user is authorized to perform
this job.
Check if the user is authorized to perform
this job.
Turn the power OFF and then back ON. Try
the problem job again. If the error still
persists, contact your service representative.
Turn the power OFF and then back ON. Try
the problem job again. If the error still
persists, contact your service representative.
Delete unnecessary documents in e-Filing
and try again.
Error Codes 119