Toshiba e-studio2050c Troubleshooting Manual page 46

1 TROUBLESHOOTING FOR THE HARDWARE
Lift the shutter knob while pulling the green lever
4
downward.
Remove the stale sheet left.
5
Do not touch the stapling area.
The actual needle point could cause you personal injury.
Push the shutter knob down and return it to its
6
original position.
7 Fit the staple cartridge.
Insert the cartridge until it is caught by the latch of the staple
cartridge and is fixed with a click.
8 Close the left cover of the finisher.
44 Clearing a Staple Jam
2
1