To Enable Your Handset For The Data Service - Inmarsat IsatPhone 2 Use Manual

Click to navigate
2 Welcome
3 Safety
6 Quick reference
9 Getting started
13 Using your IsatPhone 2
34 Location services
40 Phonebook & Contacts
44 Data
45 Personal settings
52 Security
55 Troubleshooting
58 Care and maintenance
60 Regulatory and compliance
63 Disclaimer
64 Accessories
65 Export controls
66 Malware
67 Downloading content
68 Notices
69 Protection of personal information
70 Type and specification
71 Index
44
DATA
Your phone can be used as a modem to send and receive
low rate data. Typical low rate data applications include
plain text email and small file attachments. Some Inmarsat
service providers offer proprietary applications which have
been optimised to operate with your phone. Contact your
service provider for details.
To enable your handset for the data service:
1 Install the USB Drivers on your PC. To do this, run the
USB Drivers supplied with your phone. Download the
USB Drivers and access the "How to Install USB Drivers"
guide. These are also downloadable from
inmarsat.com/isatphone.
2 Place your phone on its side, raise the antenna and
ensure the handset is ready for service.
3 Connect the handset to your PC using the USB cable.
4 Identify the modem COM port to which your phone is
connected for the data service. The COM port number
will be needed when you are using your data application.
To do this, on your PC go to Control Panel > Phone
and Modem options and select the Modem tab. You
will see IsatPhone 2 Modem and the COM port eg.
COM6. Or, go to Control Panel > System and select
the Hardware tab. Click on Device Manager and scroll
down to Modems. If your USB Drivers are installed you
will see IsatPhone 2 Modem. Right click on IsatPhone
2 Modem and select Properties. You will see the Com
port eg. COM6.
5 If you have not already done so, install your chosen
data application and follow the onscreen instructions.
You only need carry out the steps above once. For all
subsequent connections, enter your data application and
follow the onscreen instructions.