Advanced Call Features; Sending Your Caller Id; Setting Up Call Waiting; Call Barring - Inmarsat IsatPhone 2 Use Manual

Click to navigate
2 Welcome
3 Safety
6 Quick reference
9 Getting started
13 Using your IsatPhone 2
13 Connecting to the satellite
14 Using the eCompass function
14 Obtaining a GPS fix
15 Making and Receiving calls
19 Incoming call alerting
20 Calling handsfree
21 Using voicemail
21 Additional call features
23 Advanced call features
26 Messaging
33 Prepay services
34 Location services
40 Phonebook & Contacts
44 Data
45 Personal settings
52 Security
55 Troubleshooting
58 Care and maintenance
60 Regulatory and compliance
63 Disclaimer
64 Accessories
65 Export controls
66 Malware
67 Downloading content
68 Notices
69 Protection of personal information
70 Type and specification
71 Index
23
Advanced call features
Advanced call features are controlled by the Inmarsat
network. To check or change these features, the phone
must be connected to the satellite with a signal strength
of at least two bars.
Sending your caller ID
Select Menu > Settings > Call settings > Send my
caller ID, then select On, Off or Set by network and
press OK. Set by network leaves it to the network to
select whether Caller ID is displayed. The default
setting is Set by Network.
When Send my caller ID is on, your caller ID will be
displayed on the recipient's phone. If this feature is
switched off, your caller ID will be hidden and Withheld
displayed in its place.
Setting up call waiting
Select Menu > Settings > Call settings > Call waiting,
and select Activate. There may be a short delay
before the network responds. Call waiting activated
will appear when the setting has been enabled. The
Call waiting default setting is off. From the Call waiting
menu you can also select to Check status or Deactivate.
To use call waiting, see Using call waiting on page 17 for
more information.
Call barring
An IsatPhone 2 SIM card always uses an international
number format, + or 00, and the country code, 870.
Call barring prevents the following call types from being
made or received by your phone:
• Outgoing calls: bars all outgoing calls
• International calls: bars all outgoing calls except
to other Inmarsat numbers
• International except to home: bars all outgoing
calls except to other Inmarsat numbers
• Incoming calls: bars all incoming calls
• Incoming outside home: bars all incoming calls except
from other Inmarsat numbers
Note: This feature is not supported in all countries.
If you are using a SIM card with local country numbering,
the call barring is as described by the menu.
The first time you set up call barring, you will need to
reset the barring password. Select Menu > Settings > Call
settings > Call barring. Select Options and navigate to
Change barring pass code. Enter the barring pass code
and select OK. The default is 0000. Enter a new four-digit
pass code and select OK. Then enter the new pass code
again to confirm it.
You will need to enter this new pass code whenever you
change your call barring settings.

Advanced call features

1 2 4
3