DIRECTV GenieGO
TM
Remember, the GenieGO allows customers to take
programs from their HD-DVRs and make them available
on their PCs, MACs or other mobile clients. It does so by
connecting to the customer's broadband-connected or
WiFi-capable home network, a network which has HD-DVRs
included in it.
As part of your professional installation, only PC and Mac
clients will be supported, because, as you know, during the
Out-of-Home Streaming setup, accessing the customer's
router configuration is required.
Similarities and Differences from Gen 1 to Gen 2
The next generation GenieGO device is very similar to the
first gen GenieGO. The main differences are the number of
LEDs and the rear panel connections.
GenieGO Gen 2 Specifications
Has a built in MoCA interface, making it capable of
∎
connecting to the customer's DIRECTV MoCA network
(preferred connection)
Uses the standardized DIRECTV EPS-10 external power
∎
supply (used by other DIRECTV devices)
GenieGO Specifications (common to both generations)
Has 16GB of Flash Memory available for processing
∎
video
One external drive can be used on the GenieGO
∎
connected to the USB port.
The external drives must be USB 2.0 compliant.
∎
The GenieGO will format the external drive(s) prior to use.
∎
The user will be prompted to confirm before the hard drive is
formatted.
If an external drive is used on a GenieGO, that hard drive is
∎
"married" to the GenieGO device.
You cannot move an external hard drive between GenieGOs.
∎
The maximum operating temperature is 50°C/122°F.
∎
The GenieGO has one IEEE Ethernet port.
∎
The back of the GenieGO has an external power cord port
∎
labeled 12V 1.5A.
Table 1.
GenieGO Differences
Features
GenieGO (1st Gen)
Number of LEDs
Coax Networking
Capability
USB Port(s)
Power Supply
Genesis GTi10-30003 (or
equivalent)
Installation Types
Ethernet to Router
Ethernet to CCK-W
Comparison of Generations
GenieGO (2nd Gen)
3
No
Yes (2ea)
Yes (1ea)
MoCA (Preferred Professional
Installation method)
Ethernet to Router
3
3
1
Yes
EPS10
Need help?
Do you have a question about the GenieGO Gen 1 and is the answer not in the manual?