Treatment Of Error Message - Samsung CLP-600 Series Service Manual

7.5 Treatment of Error Message.

Messages appear on the SmartPanel program window or the control panel display (CLP-600N only) to
indicate the printer's status or errors. Refer to the tables below to understand the messages' meanings and
correct the problem if necessary.
Messages and their meanings are listed in alphabetical order.
Message
ACR Calibration
ADC Not Confirm Error
Adjust Photo LED
Cover Open
[Color] Toner Empty
Engine Fuser
Low Heat Error
Engine Fuser
Over Heat Error
Engine LSU Error
Install
[Color] Toner
Install
Transfer Belt
Invalid Toner
[Color]
Invalid
Transfer Belt
Samsung Electronics
Status
During auto color registration, a system
error occurs so that the registration
fails or does not run.
A problem has occurred in the ADC
in the printer.
During auto color registration, the
printer does not recognize the photo
LED in the paper transfer belt
assembly.
The top cover or access door is open.
The corresponding toner cartridge in
your printer is empty and the printer
does not operate.
The temperature in the fuser is
abnormally low.
The temperature in the fuser is
abnormally high.
A problem has occurred in the LSU
(Laser Scanning Unit) in the printer.
The indicated color toner cartridge is
not installed in the printer.
The paper transfer belt is not installed
in the printer.
An invalid toner cartridge has been
installed.
An invalid paper transfer belt has been
installed.
Check or Actions
Turn the printer off, wait 30 secs and then turn
it auto cleaning mode on.
Replace the Main PBA if the same symptoms
recur.
Check the PTB Unit contact status or replace
the PTB Unit.
Close the top cover or access door firmly.
Replace the corresponding toner cartridge
with a new one.
Unplug the power cord and plug it in again.
Unplug the power cord and plug it in again.
Unplug the power cord and plug it in again.
Install the corresponding color toner cartridge.
Install the paper transfer belt.
Only install Samsung toner cartridges,
designed for your printer. Or install the toner
cartridge into each proper cartridge slot.
Only install Samsung paper transfer belts,
designed for your printer.
Troubleshooting
Service Manual
7-17