Error Code; Error Message; 11-2T11; Tray 1 Paper Mismatch - Samsung Xpress M282 Series Service Manual

► Error Code

11-2T11

11-2T71

► Error message

Tray 1 Paper Mismatch

Manual Paper Mismatch

► Symptom
Paper option on Tray1 or Manual Feeder is incorrect.
► Troubleshooting method
1) Arrange paper on the Tray 1 and the Manual Feeder.
2) Check the paper options on Printer and Printer driver are same. If not, correct the options as same.
- Paper source
- Paper size
- Paper type
► Error Code
A1–1110
► Error message
Actuator Motor Failure : #A1-1110. Turn off then on.
► Symptom
After working the main BLDC motor, the Ready signal has not occurred within 1 sec.
► Troubleshooting method
※ First, turn the machine off then on. If the error persists, refer to the following.
1) Check if the motor connector on the main board is connected properly. Reconnect it.
2) OPC coupler has overloaded. After removing the toner cartridge, rotate the OPC coupler. (Spec : 6 kgf.cm) If there
is any damage, the OPC coupler can't rotate well. Replace the toner cartridge.
3) The main BLDC motor is defective.
- Unplug the connector from the motor carefully.
- Replace the main BLDC motor with new one.
4) If the problem persists, replace the main board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-24