Error Message - Samsung CLP-610ND Service Manual

4.1.5 Error Message

Message
[yyy] The tray cassette is not properly closed.
Cassette Out
[yyy] There is no paper in the tray.
Paper Empty
ADC Not There is a problem in the ADC (Analog to
Confirm Error Digital Converter) of your machine.
ADC Slope Error The temperature slope for ADC (Analog to
Cycle Power Digital Converter) shows the value out of the
normal range.
Adjusting... The machine is adjusting the color registration.
Registration
CTD Calibration The CTD (Color Toner Density) Calibration
Error has invalid value.
Deve Motor There is a problem with the deve motor which
Locked moves the toner supply device.
Door Open The front cover or the top cover is not
securely latched.
Duplex Jam 0 Paper has jammed during duplex printing. It is
Check Inside applicable only for the machine with this
feature.
Duplex Jam 1 Paper has jammed during duplex printing. It is
Open/Close Door applicable only for the machine with this
feature.
Duplex Jam 2 Paper has jammed during duplex printing. It is
Check Inside applicable only for the machine with this
feature.
Fuser Fan There is a problem with the fan for the fuser
Locked unit.
Humidity Open The humidity exceeds the normal range.
Cycle Power
Humidity Out The humidity is fell under the normal range.
Cycle Power
Inner Temp. Open The inner temperature of the machine is over
Cycle Power the normal range.
Inner Temp. Short The inner temperature of the machine is
Cycle Power under the normal range.
Install The transfer belt is not installed.
Transfer Belt
Samsung Electronics
Explanation
Adjustment and Troubleshooting
Solution
To close the tray, lower the rear edge align it
with the slot, and slide it into the printer.
Load paper in the tray.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Please, wait a few minutes.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Close the cover until it locks into place.
Clear the jam.
Clear the jam.
Clear the jam.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Install a Samsung-genuine transfer belt.
Service Manual
4-43