Samsung CLP-600 Series Service Manual page 141

Troubleshooting
Message
Jam0 In Tray1
Jam0 In Tray2
Jam0 In MP Tray
Jam
In Exit Area
Jam
Inside Printer
Load
[Size] In Tray1
Load
[Size] In Tray2
Load
[Size] In MP
Low Density
Main Motor
Error
Memory
Overflow
Paper Empty
[Size] In Tray1
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
Press Continue Button
Service Manual
7-18
Status
A paper jam has occurred in or near
the indicated tray.
A paper jam has occurred in the paper
exit area.
A paper jam has occurred inside the
printer.
The paper size specified in the
printer properties does not match the
paper you are loading.
The amount of the toner which is
spread on the paper transfer belt for
adjusting auto color registration is
very small, so that the printer does not
recognize the toner during auto color
registration.
A problem has occurred in the
development motor of the printer.
The printer does not have enough
memory to print the current job.
An error has occurred in the firmware
program of the printer.
The paper tray has run out of paper.
The printer is waiting for the user's
action before printing from the
Multi-purpose Tray using the manual
feed mode.
Check or Actions
Remove the jammed paper from the corre-
sponding tray.
Remove the jammed paper from the printer.
Open the access door and remove the
jammed paper from the printer.
Load the correct paper in the tray.
Replace the toner cartridge(s) with a new one.
Unplug the power cord and plug it in again.
The job automatically clears and the printer
returns to Standby Mode.
Lower the print resolution and try again.
Load paper in the paper tray.
Load a sheet of print material and press the
On Line/Continue button. You need to press
the button for each page.
Samsung Electronics