Tray 3 Cassette Is Pulled Out. Insert It Properly; Error Message - Samsung ProXpress M456x Series Service Manual

4. Troubleshooting
► Error Code
H1-1322

► Error message

Tray 3 cassette is pulled out. Insert it properly.

► Symptom
Tray 3 is pulled out or the cassette detection sensor connector is not connected or broken.
► Troubleshooting method
1) Remove and insert tray3 correctly.
2) If the problem persists, remove tray3 again.
3) Check if the cassette detection sensor cable is connected correctly. Unplug and reconnect it.
4) If the connection is OK, replace the cassette detection sensor.
5) If the problem persists, replace the SCF board.
4-78 Copyright© 1995-2017 SAMSUNG. All rights reserved.