Disassembly and Reassembly
5.4.15 Holder AC Unit
>> Before disassembling it :
* Remove the Fuser (Refer to 5.4.6)
* Remove the Top Cover Ass'y (Refer to 5.4.7)
* Pull the SMPS (Refer to 5.4.14)
1. Remove the two screws securing the Holder AC Unit and then remove the Holder AC Unit in the direction of arrow.
2. Unplug the Holder AC Unit connector from the SMPS, as shown below.
Service Manual
5-40
Holder AC
Harness
Screw
Connector(Holder AC Unit)
SMPS
Holder AC Unit
Screw
Samsung Electronics